Free design proof on every custom order: no templates, no stock SKUs
A round sticker is simply a circular die cut applied to any sticker material. The same paper, vinyl or clear stock used for other shapes, just finished without corners. Circles work especially well for logos designed inside a badge or seal, bottle caps, jar lids, and anywhere a centered mark reads better than a rectangular block. Because there's no corner to lift or catch, round stickers also tend to hold up slightly better in high-handling environments.
A round sticker is defined entirely by its die line. A circular cut through whatever material carries the print, whether that's coated paper, calendered vinyl or clear polypropylene film. Circles are a natural fit for logo marks that were designed inside a badge, seal or coin shape to begin with, since a rectangular crop would fight the design's centered symmetry. They also show up constantly on packaging (jar lids, bottle caps, tamper-evident seals) where a circular label matches the shape of the surface it sits on.
Diameter is the main sizing decision, and it's worth measuring the actual application surface rather than guessing. A cap seal needs to match the cap's diameter closely enough to look intentional; a laptop or water bottle decal has more room to be generous with size. Small diameters (under 1") work fine for icon-only designs but get cramped fast if there's any text involved, since a circle wastes more usable area at the edges than a square does for the same width.
Material choice follows the same logic as any other sticker shape. Paper stock is inexpensive and prints well but isn't durable outdoors or in contact with moisture. Fine for short-run promotional stickers or indoor packaging. Vinyl holds up to sun, water and repeated handling, which matters for anything that ends up outside, in a car, or on a product that gets washed or refrigerated. Clear stock gives a no-label look where only the printed graphic is visible against the surface underneath, which works well on glass bottles or tinted plastic.
Lamination is optional but worth considering for anything that will be handled often or exposed to moisture. A gloss or matte laminate adds a layer of scuff and water resistance without materially changing the color underneath. For food or beverage packaging specifically, it's worth confirming the adhesive is rated for the surface and environment (refrigeration, condensation, oil contact) before committing to a large print run, since a standard permanent adhesive doesn't always hold up the same way a freezer-grade or oil-resistant adhesive does.
This is the single decision that determines where a sticker can live. Paper label stock is the cheapest and takes ink beautifully, but it softens the first time it gets wet. Vinyl is a plastic film. It shrugs off rain, sun and scrubbing, which is why anything going outside or onto a vehicle starts here. Speciality faces (clear, reflective, fluorescent, corrugated) are chosen for one specific effect rather than for durability alone.
Paper or vinyl? Anywhere it might get wet, rubbed or sunlit, vinyl. Indoors, on a box or a folder, for one season. Paper does the job for noticeably less.
Most stickers run full color CMYK, which covers photographic artwork and the large majority of brand palettes. Two cases need more than that: a brand color that has to match exactly across reorders is run as a Pantone spot rather than approximated from process inks, and any artwork printed on a clear or metallic face needs a white ink underbase. Without it the colors go translucent and pick up whatever is behind them.
When do I need white ink? On any face that is not opaque white. Clear, metallic, or colored stock. On plain white vinyl the material is the white.
Laminate is a clear film bonded over the printed face. It is doing two jobs at once: protecting the ink from abrasion and chemicals, and filtering UV so the colors do not fade. An unlaminated vinyl sticker in direct sun will visibly shift long before the vinyl itself fails. Reds and blues go first. Gloss lifts color saturation; matte cuts glare, which matters on anything read at close range or photographed.
Is laminate optional? Indoors and short-term, yes. Outdoors it is the difference between a sticker that looks right after a summer and one that does not.
The adhesive is chosen against the surface and the intended life, and it is the layer people most often get wrong. Permanent adhesive builds its bond over roughly 24 to 48 hours and is not meant to come off cleanly. Removable is formulated to release without residue within a reasonable window. High-tack exists for surfaces that resist adhesion. Textured plastics, powder coat, corrugated board. Static cling has no adhesive at all and holds to glass by suction.
It has to come off later. What do I ask for? Say so explicitly and say what it is coming off. "Removable" from glass and "removable" from a painted wall are different products.
Round is a cut, not a material. Every layer above this one is still open (paper or vinyl, gloss or matte, permanent or removable) and the circle is simply the outline the blade follows. It stays the most-ordered shape in this family for a practical reason: with no corners there is nothing to catch a fingernail or a passing sleeve, so a round sticker lifts later than a square one on the same adhesive.
Is a round sticker more expensive than a square? Not meaningfully. Standard circular sizes cut from existing dies, so you are not paying for tooling.
Ask for samples before committing to a material. The difference between a paper and a vinyl face is obvious in the hand and invisible on screen.
Maximizes color saturation and wipes clean, which is why it is the default on anything handled or exposed. The trade-off is glare. Under a direct light source a gloss face can be hard to read at an angle.
Scatters light instead of reflecting it, so type stays legible from any angle and the sticker photographs without hotspots. It reads as more restrained, and it takes pen and pencil where gloss does not.
A heavier film that filters ultraviolet before it reaches the ink. This is what separates a sticker that still looks right after a year outside from one that has gone pink at the edges.
Metallic foil stamped over the printed face for a single element. A logo, a border, a year. At small sizes it does more visual work than any amount of extra color, which is why it suits seals and anniversary pieces.
Same family, genuinely different jobs. Your current selection is highlighted.
| Sticker | From | Build | Order it when |
|---|---|---|---|
| Vinyl Stickers | $180 | White vinyl, laminate, permanent | The general-purpose outdoor sticker |
| Custom Stickers | $170 | Every layer specified | Nothing standard fits the job |
| Cheap Stickers | $144 | Gang run, kiss cut, standard sizes | Volume matters more than flexibility |
| Outdoor Stickers | $160 | Outdoor vinyl, UV ink and laminate | It lives outside for more than a season |
| Clear Vinyl Stickers | $175 | Transparent film, white underbase | No visible border on glass |
| Die Cut Stickers | $190 | Cut to a custom outline | The shape is the artwork, not a rectangle |
| Puffy Stickers | $190 | Foam laminate under the face | A raised, tactile indoor sticker |
| Reflective Stickers | $180 | Glass-bead retroreflective sheeting | It has to be seen at night |
| Fluorescent Stickers | $170 | Dayglo base stock | Nothing in CMYK is bright enough |
| Sandwich Stickers | $155 | Supplied between two peels | Separated artwork must transfer as one |
| Corrugated Stickers | $180 | E-flute board, high-tack | Shelf and display pieces with real thickness |
| One Vision Stickers | $170 | Perforated black-backed film | A graphic outside, a view from inside |
| Perforated Stickers | $180 | Tear line through the face | Part of it detaches (seal, coupon, tab) |
| Decal Sticker | $185 | Backing, vinyl, transfer tape | Multi-piece artwork must land aligned |
| Pro Cut Vinyl Stickers | $180 | Cut vinyl, unprinted, transferred | Type or a logo with no background at all |
| Lettering Stickers | $160 | Cut colored vinyl, no print | Type alone, no background panel |
| Bumper Stickers | $180 | Outdoor vinyl, automotive adhesive | It goes on a vehicle and stays there |
| Car Stickers | $170 | Build follows the vehicle surface | Vehicle graphics beyond the bumper strip |
| Window Stickers | $170 | Inside reverse or outside face print | It is read through glass |
| Alarm Stickers | $230 | High-contrast, permanent, outdoor | It is a warning, not a decoration |
| Hard Hat Stickers | $175 | Thin conformable vinyl, hard-plastic adhesive | It sits on a curved helmet shell |
| Folder Stickers | $160 | Removable adhesive | It has to come back off cleanly |
| Postcard Stickers | $160 | Kiss cut on a carrier sheet | It ships attached to a mailer |
| Anniversary Stickers | $170 | Small seal, foil optional | Marking a milestone or an edition |
| Round Stickers | $155 | Circular die, any material | Shape choice (nothing to catch and lift) |
| Oval Stickers | $160 | Oval die, any material | Artwork wider than it is tall |
| Rectangular Stickers | $160 | Square cut, radius optional | Most efficient shape on the sheet |
Not meaningfully. Standard circular sizes cut from dies we already hold, so there is no tooling in the price. A non-standard diameter or a shaped cut is where cost enters.
Partly convention, partly physics. There is no corner for a fingernail or a passing sleeve to catch, so a round sticker lifts later than a square one on the same adhesive. On anything handled, that matters.
A range from small seal sizes up through common label diameters. Tell us the artwork and the application and we will point you at the nearest standard rather than tooling a new size unnecessarily.
Yes. The shape is just the cut. Paper or vinyl, gloss or matte, permanent or removable are all still open above it.
Pricing for round stickers starts at $155 and moves with quantity, size, material and finish rather than sitting on a fixed list. Setup is shared across the run, so the per-unit price drops steeply as the quantity rises: the gap between a few hundred and a few thousand is usually the significant one. Send the size, quantity and what it has to do and you get a firm figure back, not a range.
There is a practical minimum rather than a hard one. Every run carries artwork checks, a proof and a press setup, so a very small quantity of round stickers prices poorly per unit even though we will still make it. If you are ordering a small batch, ask for pricing at two or three quantities at once: the curve usually shows that a modest increase costs very little more in total.
The clock starts when you approve the proof, not when the order is placed, which is the part most people are surprised by. You get a proof first: a digital proof showing the artwork, the cut line and, on clear or speciality faces, exactly where white ink sits. Nothing is printed until you approve it. On a shaped cut, the proof is the first place you see the outline the blade will actually take. Turnaround after approval depends on the finish: anything laminated, foiled or die-cut adds a stage that cannot be compressed without causing problems later. Tell us the date you actually need them and we will work backwards from it rather than quoting a generic lead time.
Print-ready artwork with bleed and a safe margin, supplied as a PDF, AI or EPS. Because this product is cut to a shape, the file also needs a live vector path for the blade to follow. A JPG or PNG has no outline to cut to, so it has to be redrawn first. If your file is not print-ready, say so when you order. We would rather fix it before the proof than after the run.
Yes. Circular die is the standard build, and the dimensions around it are yours to set. A size that sits efficiently on the press sheet often costs no more than a standard one, while an awkward proportion that wastes half the sheet does. Ask before you commit and we will tell you whether a small change to the dimensions saves a disproportionate amount.
In most cases they are the same product under a different name: the trade uses several terms for it depending on the region and the supplier. What actually defines this one is the build: circular die, any material. Order it when shape choice (nothing to catch and lift). If you have seen it called circular labels elsewhere, describe what it has to do rather than which name you found, and we will match the specification.
Yes. We provide free samples, and on round stickers it is worth asking for one, because the difference between 70lb paper label and white vinyl is obvious in the hand and invisible on a screen. Most orders run on white vinyl, but ask for whichever you are weighing up. You also get a free design proof before anything goes to press, so nothing is printed that you have not seen.
The usual choices are gloss laminate, matte laminate, uv outdoor laminate. Finish is not decoration on this product so much as a decision about how long it survives and how it reads in the hand, so it is worth choosing against the job rather than the budget. Tell us where the finished piece ends up and we will say which finish is doing real work and which is only adding cost.
Yes, and that is what almost every order here is. Nothing in this catalogue is a stock item: round stickers are manufactured to the specification you give us, with your artwork on them. Send your logo as vector artwork where you have it, since that scales to any size without softening. If all you have is a low-resolution file, tell us and we will say what it needs before it reaches the press.
Yes, and a repeat run is simpler than the first one. We keep your approved specification on file, so a reorder skips the setup decisions and goes straight to production. Where the job used custom tooling, that tooling is reused, which is why a shaped run costs less the second time. Tell us the previous order and we will match it rather than starting the specification again.
Yes. Regalo Print has been producing custom commercial print for businesses across the USA and Canada since 2008, and every order ships tracked. The tracking number reaches you the day the job leaves, not the day it arrives. If you are working to a fixed date, say so when you order so the production schedule is built around the delivery date rather than the other way round.
